Home' Boating and RV Product Catalogue : Summer 2016-17 Catalogue Contents HK2636
The 16mm AirBlocks are Harken’s smallest block. Perfect for small synthet-
ic control lines found on high-tech dinghies. The patented bearing system
uses stainless steel balls in a captive grooved race and has a 113kg safe
working load. Headstrap spreads load making them a compact, tough
block. Hardened stainless steel inner race for maximum strength to-weight
ratio. High-strength stainless steel sideplates distribute load evenly, and
resist corrosion. Max. line diam. 5mm.
Strong and Compact Blocks! Low-friction, lightweight, strong, reliable and
affordable. These compact blocks have very high working loads for safe,
easy trimming no matter how hard the wind blows. Perfect for the small-
diameter lines favoured by racers. 30% lighter with a 60% higher working
load than Harken Classic blocks. Open AirBlock design eliminates unneces-
sary material and weight. Ball bearings, sheave, and sideplates are UV sta-
bilised with carbon black for maximum protection.
16mm single block, loop head
16mm single block, becket, loop head
16mm double block, loop head
16mm double block, becket, loop head
16mm cheek block
16mm single block, swivel head
29mm single block, swivel head
29mm single block, becket, swivel head
29mm double block, swivel head
29mm triple block, swivel head
29mm single block, loop head
29mm single stand-up block
29mm cheek block
29mm Carbo AirBlocks
Use as a mainsheet block on small dinghies, or as low-friction control block
on any size boat. Maximum line diameter 8mm.
40mm Carbo AirBlocks
For jib and mainsheet systems on high-performance dinghies and for loaded
control lines on small keelboats. Maximum line diameter 10mm.
Carbo Ratchamatic Blocks
Load sensing ratchet blocks that roll freely in both
directions under low loads and automatically engage the
ratchet as loads increase. Shifting between ratchet and light-
air modes is seamless. Ratchet engagement may be adjusted
to a higher or lower load according to strength and sailing
style. The holding power of the 57mm block is as high as 10:1,
and maximum line diameter 10mm.
Cam-Matic Ball Bearing Cam Cleats
Multiple rows of high-load ball bearings reduce friction so
cams open easily for snap-down, rather than draw-
through cleating. The cam horns and smooth V-shape
guide line for easy entry. Rounded teeth hold securely by
squeezing rather than cutting into line to reduce wear.
XAS & XTS Rope Clutches
Reliable and easily maintained rope clutches that combine
a high strength ergonomic handle and effortless release
under load whilst being friendly to a wide range of rope
sizes. Both XAS & XTS are side mountable with optional
side mount kit (available on request).
Cruising ESP Blocks
Complement our existing blocks in looks and
functionality, but simpler in design and construction. Sheaves
feature axle bearings to handle high static loads, and are ideal
for halyards or limited purchase systems on cruising boats.
57mm ESP Blocks for line up to 16mm diameter, 75mm ESP
Blocks for line up to 19mm diameter.
57mm single block, swivel head
57mm single block, becket, swivel head
57mm double block, swivel head
57mm ESP footblock
57mm single block, becket, swivel,
57mm swivel mastbase block
75mm swivel mastbase block
57mm single Ratchamatic block
XAS single, 6-12mm line diam.
XAS double, 6-12mm line diam.
XTS single, 8-14mm line diam.
XTS double, 8-14mm line diam
57mm Carbo AirBlocks
Broad working range. Use for main and jib sheets on centerboard and keel-
boats like Lightnings, Dragons, Solings, J/24s and for mainsheet systems on
catamarans. Maximum line diameter 10mm.
40mm single block, swivel head
40mm single block, becket, swivel head
40mm double block, swivel head
40mm double block, becket, swivel head
40mm triple block
40mm single block, cleat, becket
40mm triple block, cleat, becket
Micro Carbo-Cam, 3-6mm line
Micro Cam-Matic, 2-6mm line
Carbo-Matic, 3-10mm line
Cam-Matic, 3-12mm line
Sailboat Hardware.Kris.01DEC16.indd 10
01-Dec-16 7:18:57 PM
Links Archive Navigation Previous Page Next Page